Best picks

5 Best Replacement Parts for Pelican Coolers (November 2026)

Updated on · By the Freezer Cool team

The best pelican cooler replacement parts include the Poweka Cooler Latches Replacement for Yeti for simple latch swaps, the PICEBOM Cooler Replacement Parts Kit for full cooler restoration, and the Yolvvetrx Black Cooler Drain Plug Replacement for a leaking drain plug.

On this page (10 sections)
  1. The best Pelican cooler replacement parts for each repair
  2. How the best Pelican cooler replacement parts compare
  3. How we compared these replacement parts
  4. Which Pelican cooler parts fail first?
  5. How do I match a replacement part to my cooler?
  6. Are gaskets, seals and straps part of a full repair?
  7. How do I install replacement latches and hinges?
  8. How do I care for replacement cooler parts?
  9. When is a new cooler better than replacement parts?
  10. Verdict: best Pelican cooler replacement parts by repair type

The best Pelican cooler replacement parts for most repairs are the PICEBOM Cooler Replacement Parts Kit for a full restoration and the Poweka Cooler Latches for a simple latch swap. The Poweka 2-pack solves the most common one-part failure with little fuss.

The PICEBOM kit covers hinges, latches, screws and drain plugs in one box.

A cooler that will not close tight will not keep ice well. Worn latches, loose hinges and a leaking drain plug let warm air in.

Replacing the damaged part is often faster and cheaper than buying a new cooler.

Our score weighs specs, features and buyer feedback against what you are shopping for. We compared contents, materials, compatibility notes and installation steps for each part.

Our picks at a glance

  1. 1 Poweka Cooler Latches Replacement for Yeti
    Best for simple latch swaps

    Poweka Cooler Latches Replacement for Yeti

    9.7/10 our score

    See it on Amazon
  2. 2 PICEBOM Cooler Replacement Parts Kit
    Best for full cooler restoration

    PICEBOM Cooler Replacement Parts Kit

    9.6/10 our score

    See it on Amazon
  3. 3 Yolvvetrx Black Cooler Drain Plug Replacement
    Best for a leaking drain plug

    Yolvvetrx Black Cooler Drain Plug Replacement

    9.4/10 our score

    See it on Amazon
  1. 4ATESMO Cooler Hinges & Latch Replacement

    ATESMO Cooler Hinges & Latch Replacement

    Best for hinges and latches together
    Check it
  2. 5Jexobox Complete Hinges & Latch Replacement Kit

    Jexobox Complete Hinges & Latch Replacement Kit

    Best for a deluxe hinge and latch kit
    Check it

The best Pelican cooler replacement parts for each repair

The Poweka latches are the best choice for a latch-only repair. The PICEBOM kit is the best choice when several parts are worn at once.

The remaining picks solve drain leaks and hinge damage in narrower ways.

1

Poweka Cooler Latches Replacement for Yeti: Best for simple latch swaps

Poweka Cooler Latches Replacement for Yeti, pelican cooler replacement parts
9.7/10Our score
  • 2-pack T-latches
  • Premium hard durable rubber
  • Non-slip reinforced lock
  • Compatible with Yeti Tundra and Roadie

A two-pack of flexible rubber T-latches for latches that are worn, cracked or hard to pull.

See it on Amazon

Pros

  • Simple direct replacement
  • Flexible rubber is easier on fingers
  • Two latches in one pack

Cons

  • Only latches, no hinges or screws
  • Check latch size before you order

Poweka suits owners whose lid latches are cracked, stiff or hard to pull. It is a 2-pack of rubber T-latches, so you get a spare for the other side or for the next repair.

The flexible rubber shape is easier on knuckles than rigid plastic when the lid is cold.

Poweka says the latches fit Yeti Tundra and Roadie hard coolers and RTIC coolers. Use that note as a starting point, then match the size and shape to your own latch before you order.

Pelican cooler parts vary by model, so a direct visual check matters more than a brand list.

The non-slip, reinforced lock design helps the latch grip when your hands are wet. That matters for fishing and tailgating, where you open the lid often with damp or gloved hands.

The rubber build flexes instead of snapping when the lid is forced.

The trade-off is scope. This pack does not include hinges, screws or a drain plug.

Poweka also notes that the latch size was noted as large in some feedback and says the supplier was contacted to modify it. Measure your original latch first.

Poweka Cooler Latches Replacement for YetiCheck it on Amazon
2

PICEBOM Cooler Replacement Parts Kit: Best for full cooler restoration

PICEBOM Cooler Replacement Parts Kit, pelican cooler replacement parts
9.6/10Our score
  • 4 hinges, 2 latch and post sets
  • 22 stainless steel screws
  • Threaded and triple-snap drain plug assemblies
  • ABS material

A complete repair kit with hinges, latches, screws and both drain plug types for coolers with several worn parts.

See it on Amazon

Pros

  • Covers hinges, latches and drains
  • Includes screws and spare parts
  • One kit for a full repair

Cons

  • More parts than a latch-only fix needs
  • Match the shape of your original parts

PICEBOM suits owners who want one box for a full cooler restoration. The kit includes 4 hinges, 2 latch and post sets, 22 stainless steel screws, a threaded drain plug assembly and a triple-snap drain plug assembly.

That mix covers the parts that most often fail together on an older ice chest.

The hinges and latches are made of ABS material. ABS is strong, light and resistant to cracking.

Stainless steel screws resist rust in wet use. Together they suit a cooler that lives in a truck bed, boat or campsite storage bin.

Compatibility depends on shape. PICEBOM says the hinges and latches fit parts of the same shape as the original.

Compare the outline of your old hinge and latch with the new ones before you remove anything. The two drain plug types are a practical bonus, because many owners are unsure which type their cooler uses.

The trade-off is that you may have leftover parts. That is not a waste if you keep them as spares.

It is a drawback if you only need one latch. The kit also does not include a gasket or straps, so a torn seal still needs a separate fix.

For latch-only jobs, our best cooler replacement latches guide covers narrower options in more detail.

PICEBOM Cooler Replacement Parts KitCheck it on Amazon
3

Yolvvetrx Black Cooler Drain Plug Replacement: Best for a leaking drain plug

Yolvvetrx Black Cooler Drain Plug Replacement, pelican cooler replacement parts
9.4/10Our score
  • Stainless steel tether
  • Threaded leak-resistant design
  • Fits select 25-72 Qt BMX, IMX and Overland coolers
  • Tool-free installation

A single threaded drain plug with a stainless steel tether for coolers that leak or lose the plug.

See it on Amazon

Pros

  • Tether helps prevent a lost plug
  • Screw-in, tool-free fit
  • Leak-resistant threaded design

Cons

  • One part only
  • Compatibility is limited to listed models

Yolvvetrx suits owners with a drain plug that leaks, cracks or goes missing. It is a single black threaded drain plug with a stainless steel tether.

The tether keeps the plug attached to the cooler, which helps prevent the common loss of a small threaded cap.

The threaded design helps resist leaks when the plug is screwed in fully. Yolvvetrx says it fits select BMX, IMX and Overland coolers from 25 to 72 Qt.

That is a narrow compatibility list. Check your model and size against it, and match the thread size to your old plug.

Installation is tool-free. You screw the new plug in by hand and the tether holds it in place.

That makes it a quick fix at a campsite or boat ramp. UV-resistant, impact-resistant construction helps the plug handle sun and outdoor use.

The trade-off is scope. This part does not repair hinges, latches or a gasket.

If your cooler leaks around the lid rather than at the drain, this plug will not help. It is the right pick only when drainage is the problem.

If you own a Pelican Elite model, compare the fit notes in our best Pelican Elite cooler guide before you order.

Yolvvetrx Black Cooler Drain Plug ReplacementCheck it on Amazon
4

ATESMO Cooler Hinges & Latch Replacement: Best for hinges and latches together

ATESMO Cooler Hinges & Latch Replacement, pelican cooler replacement parts
9.2/10Our score
  • 2 latches and posts, 3 hinges
  • 18 high-strength stainless steel screws
  • Stainless steel and ABS materials
  • Fits listed 25-165 Qt models

A stainless steel hinge and latch set with screws for coolers where both the lid hardware is damaged.

See it on Amazon

Pros

  • Hinges and latches in one set
  • Stainless steel screws included
  • Rust-resistant materials

Cons

  • No drain plug included
  • Confirm your cooler size and post type

ATESMO suits owners who need hinges and latches replaced together. The set includes 2 latches with posts, 3 hinges and 18 high-strength stainless steel screws.

That count covers a typical two-latch, multi-hinge lid without a second trip to a hardware store.

The parts combine stainless steel with ABS plastic. ATESMO says the materials are strong, durable and anti-rust.

Stainless steel latches and screws suit wet use better than plain steel. ABS hinges resist cracking when the lid drops or the cooler is tossed in a truck.

Fit is size-specific. ATESMO says the latches suit Igloo Ice Chests from 50 to 165 Qt with a single-screw button post.

The hinges suit 25 to 165 Qt models. Pelican cooler replacement parts follow the same rule: match the post type and size range to your cooler, not just the brand name.

Installation takes a few minutes with a screwdriver. Remove the damaged hinge or latch, position the new part and tighten the included screws.

The trade-off is that no drain plug is included. If your drain also leaks, you will need a separate plug.

For a broader parts overview, see our best Pelican cooler accessories guide.

ATESMO Cooler Hinges & Latch ReplacementCheck it on Amazon
5

Jexobox Complete Hinges & Latch Replacement Kit: Best for a deluxe hinge and latch kit

Jexobox Complete Hinges & Latch Replacement Kit, pelican cooler replacement parts
8.9/10Our score
  • 2 stainless steel latches with two post types
  • 3 hinges
  • 22 high-strength stainless steel screws
  • Stainless steel and ABS parts

A complete hinge and latch kit with two post types and 22 screws for a more flexible fit across listed models.

See it on Amazon

Pros

  • Two post types for more models
  • Complete screw set included
  • Stainless steel and ABS construction

Cons

  • No drain plug included
  • Check post style before you order

Jexobox suits owners who want a deluxe hinge and latch kit with more post options. The set includes 2 stainless steel latches with two different post types, 3 hinges and 22 high-strength stainless steel screws.

The extra posts help the kit fit more cooler models than a single-post set.

The construction pairs stainless steel with ABS plastic. Jexobox says the parts resist rust, rupture and bursting.

That mix suits a lid that opens often and a cooler that rides in a vehicle. The screws are included, so you do not need to reuse corroded originals.

Compatibility is listed by size. The latches fit Igloo coolers from 50 to 165 Qt with column-style, two-screw button posts.

The hinges fit 25 to 165 Qt models. Check your post style closely.

A two-screw post will not match a single-screw post, even when the cooler size is correct.

Installation uses a standard screwdriver and takes minutes. The trade-off is that no drain plug is included, and the part count is higher than a latch-only fix needs.

If several Pelican cooler parts are worn, compare this kit with the PICEBOM kit above.

Jexobox Complete Hinges & Latch Replacement KitCheck it on Amazon

How the best Pelican cooler replacement parts compare

The Poweka 2-pack is the narrowest fix and the simplest to use. The PICEBOM kit is the broadest and covers drain parts the hinge kits miss.

The Yolvvetrx plug is a one-part fix for leaks at the drain. The ATESMO and Jexobox kits sit in the middle, covering hinges and latches with stainless steel screws.

PartBest forIncludesFit note
Poweka Cooler LatchesLatch-only swap2 rubber T-latchesYeti Tundra, Roadie and RTIC listed
PICEBOM Parts KitFull restorationHinges, latches, screws, 2 drain plugsSame shape as original
Yolvvetrx Drain PlugLeaking drain1 threaded plug with tetherSelect 25-72 Qt models listed
ATESMO Hinges and LatchesHinges plus latches3 hinges, 2 latches, 18 screwsListed 25-165 Qt models
Jexobox Hinge and Latch KitDeluxe hinge kit3 hinges, 2 latches, 2 post types, 22 screwsListed 25-165 Qt models
ProductBest forMaterialNumber of itemsColorOur score
Poweka Cooler Latches Replacement for Yetisimple latch swapsRubber2Black9.7
PICEBOM Cooler Replacement Parts Kitfull cooler restorationAcrylonitrile Butadiene Styrene22White9.6
Yolvvetrx Black Cooler Drain Plug Replacementa leaking drain plug11 Pack9.4
ATESMO Cooler Hinges & Latch Replacementhinges and latches togetherStainlessBlack & Silver9.2
Jexobox Complete Hinges & Latch Replacement Kita deluxe hinge and latch kitPlastic, Stainless steelBlack and silver8.9

For a wider view of cooler types before you buy parts, our complete cooler buying guide explains sizes, insulation and lid types. That context helps you decide whether a repair or a new cooler makes more sense.

How we compared these replacement parts

We compared contents, materials, compatibility notes and installation steps for each part. We weighted the score toward parts that fix the most common failures without extra work.

Latches and hinges ranked high because a loose lid hurts ice retention every time you open the cooler.

We checked the material of each part against its job. Rubber latches flex and grip.

ABS hinges resist cracking. Stainless steel screws resist rust.

A threaded drain plug with a tether solves leaks and loss in one part.

We did not test these parts by hand. All performance claims are labeled with the brand that makes them.

Compatibility is based on the sizes and models each brand lists.

Which Pelican cooler parts fail first?

Latches fail first on many hard coolers. Rubber hardens with sun and cold, then cracks when you pull it.

A latch that feels stiff or looks faded is near the end of its life.

Hinges fail next. A loose hinge lets the lid shift, so the latch misses its post.

That gap lets warm air in and makes the lid hard to close.

Drain plugs fail in a different way. Threads wear, the plug cracks or the cap goes missing.

A leaking drain lets meltwater escape and can flood the area around the cooler.

Gaskets and straps also wear, even though no gasket is included in these five picks. A pelican cooler gasket that is torn or flat will let cold air out even with new latches.

Check the seal whenever you replace hardware.

How do I match a replacement part to my cooler?

Match the part by shape before you match it by brand. Take a photo of the old latch, hinge or drain plug next to a ruler.

Note the length, width, screw hole pattern and post type. Keep the old part until the new one is fitted and the lid closes cleanly.

For latches, note whether the post is a single-screw button, a two-screw column or another style. The ATESMO and Jexobox kits list different post types for this reason.

A latch with the wrong post will not lock, even if the latch itself looks right.

For drain plugs, note whether yours is threaded or snap type. The PICEBOM kit includes both types, which helps when you are unsure.

The Yolvvetrx plug is threaded only, so it suits threaded holes and listed models from 25 to 72 Qt.

For hinges, note the number of hinge points on your lid. Most kits here include 3 or 4 hinges.

Count your old hinges and compare that count with the kit contents.

Are gaskets, seals and straps part of a full repair?

A gasket is part of a full repair whenever the lid closes but cold air still escapes. Clean the seal channel, then look for cracks, tears or flat spots.

A damaged pelican cooler gasket will not be fixed by new latches or hinges.

Straps are part of a full repair when they fray, crack or stretch. A strap that no longer holds tension can let the lid shift during travel.

Inspect the buckle and the mount points, not just the middle of the strap.

None of the five picks here includes a gasket or a strap set. That is a real limit.

If your seal or straps are worn, you will need a separate part.

How do I install replacement latches and hinges?

Start with a standard screwdriver and a clean work surface. Remove the old screws and lift the damaged part off.

Clean the mounting area so the new part sits flat. Position the new hinge or latch and start the screws by hand first.

Tighten the screws evenly. Over-tightening can crack plastic around the screw hole.

Close the lid and check that each latch catches its post. Open and close the lid several times through its full range.

Check the seal line after the hardware is fitted. The lid should sit evenly with no visible gap.

If one side sits high, the hinge or latch on that side may need adjustment.

How do I care for replacement cooler parts?

Clean rubber latches and gaskets with mild soap and water. Wipe away grit that can grind the rubber when the lid closes.

Let the parts dry before you close the lid for storage.

Check screws once a season. Stainless steel screws resist rust, but vibration can loosen them.

Tighten any loose screw and look for cracks around the mounting holes.

Check the drain plug after each trip. Clear debris from the threads and make sure the plug screws in fully.

A tether helps, but it does not clean the threads for you.

When is a new cooler better than replacement parts?

A new cooler is better when the cabinet is cracked or the insulation is damaged. Replacement parts fix latches, hinges and drains.

They do not fix a warped lid, a cracked wall or a broken seal channel.

A new cooler is also better when parts for your model are hard to find. If no kit lists your size or post type, a repair may take too long.

Compare the cost and wait time for parts with the price of a new cooler.

Our complete cooler buying guide helps you compare new models by size and use. Use it when the repair cost approaches the cost of a new cooler.

Verdict: best Pelican cooler replacement parts by repair type

The best Pelican cooler replacement parts depend on which part failed. Pick the Poweka Cooler Latches if only the latches are worn.

Pick the PICEBOM Cooler Replacement Parts Kit if hinges, latches and drain parts all need work. Pick the Yolvvetrx Drain Plug if the drain leaks or the plug is lost.

Pick the ATESMO or Jexobox hinge kits if the lid hardware is damaged but the drain is fine. Jexobox gives you two post types.

ATESMO gives you a simpler set with 18 screws.

Match the shape, size and post type of your original part before you order. Clean the seal channel and check the gasket while you repair the hardware.

Start with the best cooler replacement latches guide if your lid is the only problem. For a broader parts list, see our best Pelican cooler accessories guide.

Our top 3 picks at a glance

  1. 1 Poweka Cooler Latches Replacement for Yeti
    Best for simple latch swaps

    Poweka Cooler Latches Replacement for Yeti

    9.7/10 our score

    See it on Amazon
  2. 2 PICEBOM Cooler Replacement Parts Kit
    Best for full cooler restoration

    PICEBOM Cooler Replacement Parts Kit

    9.6/10 our score

    See it on Amazon
  3. 3 Yolvvetrx Black Cooler Drain Plug Replacement
    Best for a leaking drain plug

    Yolvvetrx Black Cooler Drain Plug Replacement

    9.4/10 our score

    See it on Amazon

Frequently asked questions

What are the most common Pelican cooler replacement parts?

Latches, hinges, gaskets, straps and drain plugs are the parts owners replace most often. Worn rubber latches and loose hinges stop a lid from closing tight.

A damaged drain plug can let water leak out.

Match the shape and size of your original part before you order.

How do I know if a replacement part fits my Pelican cooler?

Compare the shape, size and mounting style with your original part. Note the post type and screw pattern for latches and hinges.

For drain plugs, note whether yours is threaded or snap type.

Keep the old part until the new one is fitted.

Do I need tools to replace cooler latches or hinges?

Most latch and hinge replacements need only a standard screwdriver. Remove the old screws, lift the damaged part off, position the new part and tighten the screws.

A threaded drain plug usually screws in by hand.

Check the part before you start.

When should I replace a cooler gasket instead of hardware?

Replace a gasket when the lid closes but cold air escapes around the seal. Look for cracks, tears, flattening or stiffness in the rubber seal.

Clean the seal channel first so you can see the damage clearly.

Hardware fixes will not help a bad gasket.

Are stainless steel screws better than plastic parts?

Stainless steel screws resist rust better than plain steel in wet outdoor use. ABS plastic parts resist cracking and are lighter, but they can break under hard impacts.

Many kits combine both materials for strength and flexibility.